| Form Factor | Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170.18 millimeters
[6.7 inches] x 170.18 millimeters [6.7 inches]) | 
| Processor Chipset | Intel Braswell N4200 Processor with integrated graphics | 
| Memory | Support for dual channel DDR3L 1867 SO-DIMMs | 
| Support for up to 8 GB of system memory on a single SO-DIMM (or 4 GB each by 2 SO-DIMM) | 
| 204-pin DDR3L SO-DIMM | 2 | 
| Graphics | Integrated graphics: | 
| Digital displays (HD-Out) | 
| Internal flat panel displays: | 
| LVDS | 
| Embedded DisplayPort* eDP* | 
| External graphics support via a PCI Express 2.0 x1 graphics add-in card connector | 
| Audio | 2 + 2 Channel High Definition Audio ( HD Audio) using a Realtek* ALC283 audio codec supporting: | 
| Analog stereo line-out (back panel jack) | 
| In-chassis stereo speakers support (3 W/3 Ω via an internal header) | 
| Expansion Capability | PCI Express x1 add-in card connector | 1 | 
| M.2 (2242/2260/2280) with USB2.0 and SATA III signal for SSD | 1 | 
| M.2 (2230) with PCIex1 and USB2.0 signal for wireless | 1 | 
| Peripheral Interfaces | USB 2.0 front panel ports | 2 (Header) | 
| USB 3.0 back panel connectors (blue) | 4 | 
| SATA 6.0 Gb/s | 1 | 
| SATA 6.0 Gb/s port (multiplexed with an m.2 slot) | 1 | 
| Legacy I/O | Legacy I/O Controller that provides: | 
| Serial port header | 2 | 
| Parallel port via an onboard header (Option with MiAPI header) | 1 | 
| LAN Support | 2x Intel I211-AT (10/100/1000 Mb/s) Ethernet LAN controller | 
| BIOS | BIOS resident in a Serial Peripheral Interface (SPI) Flash device | 
| Support for Advanced Configuration and Power Interface (ACPI), and System Management BIOS (SMBIOS) | 
| Hardware Management | Nuvoton NCT6793D based subsystem, including: | 
| Voltage sense to detect out of range power supply voltages | 
| Thermal sense to detect out of range thermal values | 
| 2x 4-pin system fan header | 
| Power Requirement | DC connectivity via back-panel DC jack(2.5mm/ ID, 5.5mm/ OD) | 
| Internal 2 pin power connector | 
| Environment | Operating Temperature: 0°C to +60°C | 
| Storage Temperature: -20°C to +70°C | 
| Safety | CE | 
| FCC | 
                                                                							
Funktioniert mit Windows 10 (das war schon klar), mif Pfsense 2.4.5 und 2.5.1 und mit ESXI 6.7.0. Was ich vermisse: eine Möglichkeit, die Soundkarte abzuschalten. Und es gibt keine BIOS Updates. Der Verbrauch liegt zwischen 8 und 18 W in Windows und 9-13 W in Pfsense und ESXi, wobei ich nicht weiß, ob der Prozessor auf anderen Betriebsszstemen als Windows auf Burst hochtaktet. Die Prozessorauslastung in Pfsense ist, im Mittel, bei 5%, mit 2 x WAN und Snort. Unter ESXI funktioniert kein Passthrough. Die Platine akzeptiert mindestens 16 GB RAM. Ein kleiner Ventilator ist empfehlenswert, es funktioniert aber auch ohne.